GO TO THE FOLLOWING


WESTERN LATIGOS/TIE STRAPS
TABLE OF CONTENTS
 PAGE NAVIGATION  SCROLL DOWN OR CLICK ON YOUR AREA OF INTEREST

 1 1/2 " X  6' LATIGO LEATHER LATIGO/TIE STRAP


STANDARDS AND PRACTICES: ASMA recommends that leather latigos/tie straps and half-breed latigos should be made from 9/10 oz or heavier premium latigo leather for safety.  Also, it is recommended that no latigos/tie and half-breed straps should be used that are less than 1 1/2" in width, with the exception of a pony saddle that is used on a small pony.  If the pony saddle is to be used on a regular size horse, a standard latigo/tie strap should be used.

MATERIALS LIST AND COSTS  – Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
.94
9/10+ OZ SQ FT  LATIGO LEATHER
10.20
9.59
1
3/8" X 12" LATIGO TIE
0.44
0.44
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
1.92
     MATERIALS COST
11.95
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
0.63
MATERIALS TOTAL COST
12.57

.34

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
13.60
26.17
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
15.30
27.87
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


17.00

29.57
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
18.70
31.27
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
20.40
32.97

TIMES  – Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT
6.00
FINISH ENDS AND EDGE
8.00
DYE EDGES                                             
4.00
MARK AND PUNCH HOLES
2.50
     TOTAL MINUTES
20.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.34

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
1
STRAP BODY -- 1 1/2" X 72"
1.5
72
72.00
     TOTAL SQ INCHES
72.00
          25% WASTE SQ INCHES
18.00
               TOTAL SQ FT
0.63
 1 3/4 " X  6' LATIGO LEATHER LATIGO/TIE STRAP
     


STANDARDS AND PRACTICES: ASMA recommends that leather latigos/tie straps and half-breed latigos should be made from 9/10 oz or heavier premium latigo leather for safety.  Also, it is recommended that no latigos/tie and half-breed straps should be used that are less than 1 1/2" in width, with the exception of a pony saddle that is used on a small pony.  If the pony saddle is to be used on a regular size horse, a standard latigo/tie strap should be used.




MATERIALS LIST AND COSTS  – Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.09
9/10+ OZ SQ FT  LATIGO LEATHER
10.20
11.12
1
3/8" X 12" LATIGO TIE
0.44
0.44
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
2.22
     MATERIALS COST
13.78
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
0.73
MATERIALS TOTAL COST
14.51

.34

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
14.40
28.91
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
16.20
30.71
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


18.00

32.51
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
19.80
34.31
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
21.60
36.11

TIMES  – Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT
6.00
FINISH ENDS AND EDGE
8.00
DYE EDGES                                             
4.00
MARK AND PUNCH HOLES
2.50
     TOTAL MINUTES
20.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.34

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
1
STRAP BODY -- 1 3/4" X 72"
1.75
72
126.00
     TOTAL SQ INCHES
126.00
          25% WASTE SQ INCHES
31.50
               TOTAL SQ FT
1.09
 2" X  6' LATIGO LEATHER LATIGO/TIE STRAP
     


STANDARDS AND PRACTICES: ASMA recommends that leather latigos/tie straps and half-breed latigos should be made from 9/10 oz or heavier premium latigo leather for safety.  Also, it is recommended that no latigos/tie and half-breed straps should be used that are less than 1 1/2" in width, with the exception of a pony saddle that is used on a small pony.  If the pony saddle is to be used on a regular size horse, a standard latigo/tie strap should be used.




MATERIALS LIST AND COSTS  – Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.25
9/10+ OZ SQ FT  LATIGO LEATHER
10.20
12.75
1
3/8" X 12" LATIGO TIE
0.44
0.44
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
2.55
     MATERIALS COST
15.74
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
0.83
MATERIALS TOTAL COST
16.57

.34

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
13.60
30.17
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
15.30
31.87
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


17.00

33.57
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
18.70
35.27
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
20.40
36.97

TIMES  – Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT
6.00
FINISH ENDS AND EDGE
8.00
DYE EDGES                                             
4.00
MARK AND PUNCH HOLES
2.50
     TOTAL MINUTES
20.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.34

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
1
STRAP BODY -- 2" X 72"
2.
72
144.00
     TOTAL SQ INCHES
144.00
          25% WASTE SQ INCHES
36.00
               TOTAL SQ FT
1.25
 1 3/4" X  6' NYLON LATIGO/TIE STRAP






STANDARDS AND PRACTICES: ASMA recommends that only heavy duty (1 3/4" wide
and 6000+ lbs per 1" width tensile strength) should be used for a latigo/tie strap.
IT IS HIGHLY RECOMMENDED THAT NO POLYPROPYLENE BE USED EVEN IF DOUBLED AND STITCHED.

MATERIALS LIST AND COSTS  – Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
2
YDS OF 1 3/4" HEAVY NYLON WEBBING     (6000+ LBS PER 1" WIDTH TENSILE STRENGTH))
1.44
2.88
1
3/8" X 12" LATIGO TIE
0.44
0.44
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
0.58
     MATERIALS COST
3.90
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
0.21
MATERIALS TOTAL COST
4.10

.13

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
5.20
9.30
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
5.85
9.95
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


6.50

10.60
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
7.15
11.25
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
7.80
11.90

TIMES  – Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT
3.00
MARK AND BURN HOLES
4.50
     TOTAL MINUTES
7.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.13



Copyright 2005 - 2016 American Saddle Makers Association, Inc.