GO TO THE FOLLOWING



DOUBLED/LINED AND STITCHED
REAR FLANK BILLETS
TABLE OF CONTENTS
 PAGE NAVIGATION  SCROLL DOWN OR CLICK ON YOUR AREA OF INTEREST

DOUBLED AND STITCHED REAR FLANK BILLETS
 1 1/2" DOUBLED AND STITCHED REAR FLANK BILLETS WITH TIES



MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.56
SKIRTING LEATHER
11.25
17.55
2
3/8" X 12" TIE STRAPS
0.44
0.88
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
3.51
     MATERIALS COST
21.94
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.15
MATERIALS TOTAL COST
23.09

.70

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
28.00
51.09
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
31.50
54.59
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


35.00

58.09
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
38.50
61.59
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
42.00
65.09

TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
LEVEL (SPLIT) OPTIONAL  GLUE AND FINISH ENDS
8.75
STITCH
9.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
42.25
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.70

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
4
BILLET STRAPS - 1 ½" X 30                              
1.5
30.
180.00
     TOTAL SQ INCHES
180.00
          25% WASTE SQ INCHES
45.00
               TOTAL SQ FT
1.56
 1 3/4" DOUBLED AND STITCHED REAR FLANK BILLETS WITH TIES



MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.82
SKIRTING LEATHER
11.25
20.48
2
3/8" X 12" TIE STRAPS
0.44
0.88
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
4.10
     MATERIALS COST
25.45
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.34
MATERIALS TOTAL COST
26.79

.70

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
28.00
54.79
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
31.50
58.29
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


35.00

61.79
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
38.50
65.29
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
42.00
68.79

TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
LEVEL (SPLIT) OPTIONAL  GLUE AND FINISH ENDS
8.75
STITCH
9.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
42.25
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.70

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
4
BILLET STRAPS - 1 3/4" X 30                              
1.75
30.
210.00
     TOTAL SQ INCHES
210.00
          25% WASTE SQ INCHES
52.50
               TOTAL SQ FT
1.82

 2" DOUBLED AND STITCHED REAR FLANK BILLETS WITH TIES

MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
2.08
SKIRTING LEATHER
11.25
23.40
2
3/8" X 12" TIE STRAPS
0.44
0.88
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
4.68
     MATERIALS COST
28.96
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.52
MATERIALS TOTAL COST
30.48

.70

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
28.00
58.48
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
31.50
61.98
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


35.00

65.48
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
38.50
68.98
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
42.00
72.48

TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
LEVEL (SPLIT) OPTIONAL  GLUE AND FINISH ENDS
8.75
STITCH
9.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
42.25
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.70

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
4
BILLET STRAPS -2" X 30                              
2.
30.
240.00
     TOTAL SQ INCHES
240.00
          25% WASTE SQ INCHES
60.00
               TOTAL SQ FT
2.08

 1 1/2" DOUBLED AND STITCHED REAR FLANK BILLETS WITH BILLET LOOP


MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.63
SKIRTING LEATHER
11.25
18.34
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
3.67
     MATERIALS COST
22.01
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.16
MATERIALS TOTAL COST
23.16

.78

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
31.20
54.36
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
35.10
58.26
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


39.00

62.16
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
42.90
66.06
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
46.80
69.96
TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
LEVEL (SPLIT) OPTIONAL  GLUE AND FINISH ENDS
8.75
MAKE-UP BILLET LOOP AND INSTALL ON BILLETS FOR STITCHING
5.25
STITCH BILLETS AND BILLET LOOP
10.75
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES     
3.00
     TOTAL MINUTES
46.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.78

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
4
BILLET STRAPS - 1 ½" X 30                              
1.5
30.
180.00
2
BILLET LOOPS  - 1" X 4"
1
4
8.00
     TOTAL SQ INCHES
188.00
          25% WASTE SQ INCHES
47.00
               TOTAL SQ FT
1.63

 1 3/4" DOUBLED AND STITCHED REAR FLANK BILLETS WITH BILLET LOOP


MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.92
SKIRTING LEATHER
11.25
21.60
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
4.32
     MATERIALS COST
25.92
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.36
MATERIALS TOTAL COST
27.28

.78

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
31.20
58.48
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
35.10
62.38
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


39.00

66.28
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
42.90
70.18
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
46.80
74.08
TIMES Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
LEVEL (SPLIT) OPTIONAL  GLUE AND FINISH ENDS
8.75
MAKE-UP BILLET LOOP AND INSTALL ON BILLETS FOR STITCHING
5.25
STITCH BILLETS AND BILLET LOOP
10.75
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES     
3.00
     TOTAL MINUTES
46.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.78

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
4
BILLET STRAPS - 1 3/4" X 30                              
1.75
30.
210.00
2
BILLET LOOPS  - 1 1/4" X 4 1/2"
1.25
4.5
11.25
     TOTAL SQ INCHES
221.25
          25% WASTE SQ INCHES
55.31
               TOTAL SQ FT
1.92

 2" DOUBLED AND STITCHED REAR FLANK BILLETS WITH BILLET LOOP

MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
2.21
SKIRTING LEATHER
11.25
24.86
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
4.97
     MATERIALS COST
29.84
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.57
MATERIALS TOTAL COST
31.41

.78

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
31.20
62.61
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
35.10
66.51
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


39.00

70.41
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
42.90
74.31
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
46.80
78.21
TIMES Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
LEVEL (SPLIT) OPTIONAL  GLUE AND FINISH ENDS
8.75
MAKE-UP BILLET LOOP AND INSTALL ON BILLETS FOR STITCHING
5.25
STITCH BILLETS AND BILLET LOOP
10.75
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES     
3.00
     TOTAL MINUTES
46.50
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.78

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
4
BILLET STRAPS - 2" X 30                              
2.
30.
240.00
2
BILLET LOOPS  - 1 1/2" X 5"
1.5
5
15.00
     TOTAL SQ INCHES
255.00
          25% WASTE SQ INCHES
63.75
               TOTAL SQ FT
2.21

LINED AND STITCHED REAR FLANK BILLETS
 1 1/2" LINED AND STITCHED REAR FLANK BILLETS WITH TIES


MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
.78
SKIRTING LEATHER
11.25
8.78
1.08
LATIGO
8.50
9.18
2
3/8" X 12" TIE STRAPS
0.44
0.88
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
1.76
     MATERIALS COST
20.59
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.08
MATERIALS TOTAL COST
21.67

.80

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
32.00
53.67
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
36.00
57.67
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


40.00

61.67
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
44.00
65.67
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
48.00
69.67

TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
CUT OUT LINING STRAPS
4.75
LEVEL (SPLIT) OPTIONAL  GLUE LINING TO BILLET STRAPS AND FINISH ENDS
8.75
STITCH
9.25
TRIM  LINING
1.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
48.25
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.80

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
BILLET STRAPS - 1 ½" X 30                              
1.5
30.
90.00
     TOTAL SQ INCHES
90.00
          25% WASTE SQ INCHES
22.50
               TOTAL SQ FT
0.78
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
LINING STRAPS - APPROX  -   2" X 31   (CUT AROUND ½" LARGER THAN BILLET STRAPS)     
2
31.
124.00
     TOTAL SQ INCHES
124.00
          25% WASTE SQ INCHES
31.00
               TOTAL SQ FT
1.08
 1 3/4" LINED AND STITCHED REAR FLANK BILLETS WITH TIES



MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
.91
SKIRTING LEATHER
11.25
10.24
1.21
LATIGO
8.50
10.29
2
3/8" X 12" TIE STRAPS
0.44
0.88
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
2.05
     MATERIALS COST
23.45
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.23
MATERIALS TOTAL COST
24.68

.80

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
32.00
56.68
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
36.00
60.68
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


40.00

64.68
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
44.00
68.68
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
48.00
72.68

TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
CUT OUT LINING STRAPS
4.75
LEVEL (SPLIT) OPTIONAL  GLUE LINING TO BILLET STRAPS AND FINISH ENDS
8.75
STITCH
9.25
TRIM  LINING
1.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
48.25
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.80

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
BILLET STRAPS - 1 3/4" X 30                              
1.75
30.
105.00
     TOTAL SQ INCHES
105.00
          25% WASTE SQ INCHES
26.25
               TOTAL SQ FT
0.91

NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
LINING STRAPS - APPROX  -   2" X 31   (CUT AROUND ½" LARGER THAN BILLET STRAPS)     
2.25
31.
139.50
     TOTAL SQ INCHES
139.50
          25% WASTE SQ INCHES
34.88
               TOTAL SQ FT
1.21


 2" LINED AND STITCHED REAR FLANK BILLETS WITH TIES



MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.04
SKIRTING LEATHER
11.25
11.70
1.21
LATIGO
8.50
10.29
2
3/8" X 12" TIE STRAPS
0.44
0.88
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
2.34
     MATERIALS COST
25.21
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.33
MATERIALS TOTAL COST
26.53

.80

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
32.00
58.53
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
36.00
62.53
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


40.00

66.53
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
44.00
70.53
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
48.00
74.53

TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
CUT OUT LINING STRAPS
4.75
LEVEL (SPLIT) OPTIONAL  GLUE LINING TO BILLET STRAPS AND FINISH ENDS
8.75
STITCH
9.25
TRIM  LINING
1.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
48.25
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.80

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
BILLET STRAPS -2" X 30                              
2.
30.
120.00
     TOTAL SQ INCHES
120.00
          25% WASTE SQ INCHES
30.00
               TOTAL SQ FT
1.04
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
LINING STRAPS - APPROX  -   2 1/2" X 31   (CUT AROUND ½" LARGER THAN BILLET STRAPS)     
2.5
31.
155.00
     TOTAL SQ INCHES
155.00
          25% WASTE SQ INCHES
38.75
               TOTAL SQ FT
1.35
 1 1/2" LINED AND STITCHED REAR FLANK BILLETS WITH BILLET LOOP



                                   MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
.85
SKIRTING LEATHER
11.25
9.56
1.21
LATIGO
8.50
10.29
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
1.91
     MATERIALS COST
21.76
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.15
MATERIALS TOTAL COST
22.91

.92

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
36.80
59.71
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
41.40
64.31
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


46.00

68.91
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
50.60
73.51
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
55.20
78.11
TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
CUT OUT LINING STRAPS
4.75
LEVEL (SPLIT) OPTIONAL  GLUE LINING TO BILLET STRAPS AND FINISH ENDS
8.75
MAKE-UP BILLET LOOP AND INSTALL ON BILLETS FOR STITCHING
5.25
STITCH  BILLETS AND BILLET LOOP
10.75
TRIM  LINING
1.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
55.00
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.92

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
BILLET STRAPS - 1 ½" X 30                              
1.5
30.
90.00
2
BILLET LOOPS  - 1" X 4"
1
4
8.00
     TOTAL SQ INCHES
98.00
          25% WASTE SQ INCHES
24.50
               TOTAL SQ FT
0.85

NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
LINING STRAPS - APPROX  -   2" X 31   (CUT AROUND ½" LARGER THAN BILLET STRAPS)     
2
31.
124.00
     TOTAL SQ INCHES
124.00
          25% WASTE SQ INCHES
31.00
               TOTAL SQ FT
1.08

 1 3/4" LINED AND STITCHED REAR FLANK BILLETS WITH BILLET LOOP



MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.92
SKIRTING LEATHER
11.25
11.36
1.21
LATIGO
8.50
10.29
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
2.27
     MATERIALS COST
23.92
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.26
MATERIALS TOTAL COST
25.18

.92

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
36.80
61.98
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
41.40
66.58
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


46.00

71.18
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
50.60
75.78
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
55.20
11.25
TIMES Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
CUT OUT LINING STRAPS
4.75
LEVEL (SPLIT) OPTIONAL  GLUE LINING TO BILLET STRAPS AND FINISH ENDS
8.75
MAKE-UP BILLET LOOP AND INSTALL ON BILLETS FOR STITCHING
5.25
STITCH  BILLETS AND BILLET LOOP
10.75
TRIM  LINING
1.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
55.00
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.92

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
BILLET STRAPS - 1 3/4" X 30                              
1.75
30.
105.00
2
BILLET LOOPS  - 1 1/4" X 4 1/2"
1.25
4.5
11.25
     TOTAL SQ INCHES
116.25
          25% WASTE SQ INCHES
29.06
               TOTAL SQ FT
1.01

NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
LINING STRAPS - APPROX  -   2" X 31   (CUT AROUND ½" LARGER THAN BILLET STRAPS)     
2
31.
124.00
     TOTAL SQ INCHES
124.00
          25% WASTE SQ INCHES
31.00
               TOTAL SQ FT
1.08

 2" LINED AND STITCHED REAR FLANK BILLETS WITH BILLET LOOP



MATERIALS LIST AND COSTS   Based on average costs and times for a saddle maker with 3/5 years of experience
AMOUNT
DESCRIPTION
COST
TOTAL
1.17
SKIRTING LEATHER
11.25
13.16
1.21
LATIGO
8.50
10.29
MISC SUPPLIES  @ 20% (THREAD-RIVETS-DYE-OIL, ETC.)
2.63
     MATERIALS COST
26.08
PROFIT OR RETURN ON INVESTMENT ON MATERIALS USED
1.37
MATERIALS TOTAL COST
27.45

.92

HOURS OF LABOR NEEDED TO MANUFACTURE ITEM

 { The shop rate is the total of your hourly wage and an hourly rate to cover your overhead costs }

SHOP RATE TOTAL
MATERIALS
&
 SHOP RATE
TOTAL
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF   $ 40.00 PER HOUR
36.80
64.25
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 45.00  PER HOUR
41.40
68.85
     HOURS OF LABOR AT A SHOP RATE OF $ 50.00 per HOUR
    NATIONAL AVERAGE HOUSEHOLD INCOME


46.00

73.45
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT  A SHOP RATE OF  $ 55.00  PER HOUR
50.60
78.05
    HOURS OF LABOR NEEDED TO MANUFACTURE ITEM AT A SHOP RATE OF  $ 60.00  PER HOUR
55.20
82.65
TIMES   Based on average times for a saddle maker with 3/5 years of experience
PROCESS
TIMES    (minutes)
CUT OUT BILLET STRAPS
6.25
CUT OUT LINING STRAPS
4.75
LEVEL (SPLIT) OPTIONAL  GLUE LINING TO BILLET STRAPS AND FINISH ENDS
8.75
MAKE-UP BILLET LOOP AND INSTALL ON BILLETS FOR STITCHING
5.25
STITCH  BILLETS AND BILLET LOOP
10.75
TRIM  LINING
1.25
EDGE, OIL, TOP COAT, AND DYE EDGES
12.50
MARK AND PUNCH HOLES
5.50
     TOTAL MINUTES
55.00
     TOTAL HOURS OF LABOR NEEDED TO MANUFACTURE ITEM
0.92

MATERIALS LIST
NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
BILLET STRAPS - 2" X 30                              
2.
30.
120.00
2
BILLET LOOPS  - 1 1/2" X 5"
1.5
5
15.00
     TOTAL SQ INCHES
135.00
          25% WASTE SQ INCHES
33.75
               TOTAL SQ FT
1.17

NO
DESCRIPTION
WIDTH
LENGTH
TOTAL
2
LINING STRAPS - APPROX  -   2" X 31   (CUT AROUND ½" LARGER THAN BILLET STRAPS)     
2
31.
124.00
     TOTAL SQ INCHES
124.00
          25% WASTE SQ INCHES
31.00
               TOTAL SQ FT
1.08



Copyright 2005 - 2016 American Saddle Makers Association, Inc.